home *** CD-ROM | disk | FTP | other *** search
- Path: news.cyberstore.ca!usenet
- From: William Avery <mdvision@summer.com>
- Newsgroups: comp.dcom.modems
- Subject: Re: Setting No. of rings on FaxWorks Voice for Windows ver 3.00g
- Date: Fri, 08 Mar 1996 00:38:45 -0800
- Organization: Meadowvision Systems
- Message-ID: <313FF215.5F0E@summer.com>
- References: <4hm2rg$bpc@dfw-ixnews4.ix.netcom.com>
- NNTP-Posting-Host: 206.12.170.214
- Mime-Version: 1.0
- Content-Type: text/plain; charset=us-ascii
- Content-Transfer-Encoding: 7bit
- X-Mailer: Mozilla 2.0 (Win16; I)
-
- Thomas A. Espinoza wrote:
- >
- > The software referred to above was included in a Cardinal 28.8 V.34
- > Internal Fax Modem for PC's that I recently purchased. After an
- > excruciating installation almost everything seems to be working right
- > with one exception.
- > Unfortunately I have one problem. I cannot seem to make the settings
- > for the no of rings in either the voice or the fax setup stay. I would
- > like to have the fax pick up in two rings and voice pick up in four
- > rings. I am using automatic reception and I have not enabled toll
- > saver. After I make my selections for the number of rings and close the
- > respective dialog boxes I find that the no of rings setting was not
- > where I set them. Any fixes? Is this the right place to even ask the
- > question?
- > Thanks
- > Tom-Espi@ix.netcom.comJust installed and am using this combination as well. You may get to set it
- up in the admin setup to one number of rings only. I don't see why you want
- to do this? At four rings you can get to the phone to avoid the recording and
- still have no problem rec'ing faxes with autoanswer. Although not a
- successful install the first time around, on the second try, all works as
- advertized.
- --
-
- William T.M.(Bill)Avery
- Meadowvision Systems
- R.R.3, S-44, C-9
- Summerland, B.C.
- Canada V0H-1Z0
- Ph/Fax:(604)494-4283
-
-
-